- 5000 lb. Lift Capacity
- 12 ft. Mast
- New! ITL Drive Axle
- New! ITL 4-speed Fully Syncronized Transmission
- New! ITL 4 W/D Transmission and Steerable Drive Axle
- New! 2-Stage Hydraulic Pump
- Heavy Duty Spindles, Hubs, Bearings, Races, & Wheels
- 48" x 4" x 1 3/4" Shaft type pallet forks
- Front and Rear Work Lights
- 19.5LX24 Drive Tires (2 & 4 W/D)
- 11LX16 Steer Tire (2 W/D)
- 40 Deg. Forward Tilt for Transport
- See-Thru Roller Masts with Side Shift
- 60" Wide Hook or Shaft Type Carriage
(72" & 84" wide optional) - Back up Alarm
- Engine Air Pre-Cleaner
- Hinged Drop Down Instrument Cluster for Easy Access
- Automotive Blade Type Fuses
Engine Specifications
| Make |
Perkins (see note 1) |
| No. of cylinders |
4 |
| Displacement |
243 CID |
HP (max. gross)
 (net) = |
80 @ 2200 RPM
72 @ 2200 RPM |
| Max. Torque |
221 lbs. ft @ 1400 RPM |
| Bore and Stroke |
3.937 in. x 5.0 in. |
| Electrical |
12 Volt, 700 Cold Cranking Amps @ 0 Deg. F
12 Volt, 55 Amp Std. (70 amp optional)
Heavy Duty High Torque Starter
Automotive Style Fuses |
| Cooling System |
Thermostat / Anti-Freeze 18 Qt
17-1/2" 7 blade fan |
| Fuel Tank |
25 U.S. Gallons |
| Fuel Filter |
Dual / paper element / water separator
Tank Strainer |
| Oil Filter |
Full Flow 1 qt. Capacity |
| Air Cleaner |
Dual Element Dry Type (with pre-cleaner) |
| Exhaust System |
Vertical Exhaust For Noise Reduction |
Additional Mast Data
| 1 |
Overall height at low carry (6" off the ground) |
111 |
| 2 |
Rate of Lift (Approximate) |
82 FPM |
| 3 |
Free Lift (Additional free lift optional) |
0 |
| 4 |
Carriage Width (Other widths optional) |
60 |
| 5 |
Lateral Fork Adjustment (Outside Dimension) |
58 |
Operational Data (Approximate) w/12" Mast
| A |
Overall Height Mast Extended |
180 |
| B |
Overall Height Mast Collapsed |
108 |
| C |
Overall Height Top of Overhead Guard |
100 |
| D |
Forward Tilt |
40 Deg. |
| E |
Rearward Tilt |
10 Deg. |
| F |
Length of Forks |
48 |
| G |
C/L drive Axle to Face of Forks |
36 |
| H |
Wheelbase |
85 |
| I |
Underclearance (Mast) |
12 |
| |
(Drive Axle) |
17 |
| |
(Steer Axle) |
11 |
| J |
Counterweight Overhang |
27 |
| K |
Overall Length to Face of Forks |
148 |
| L |
Tread Width (Drive Tires) |
68 |
| M |
Overall Width (19.5Lx24) |
87 |
| N |
Side Shift (Total) |
6 |
| O |
Intersecting Aisles (2 W/D / 4 W/D) |
138/143 |
| P |
Right Angle Stacking (w/brake)(2 W/D / 4 W/D) |
166/168 |
| |
(w/out brake)(2 W/D / 4 W/D) |
195/196 |
| Q |
Turning Radius (w/brake)(2 W/D / 4 W/D) |
111/125 |
| |
(w/out brake)(2 W/D / 4 W/D) |
152/159 |
| R |
Turning Clearance (w/brake)(2 W/D / 4 W/D) |
133/129 |
| |
(w/out brake)(2 W/D / 4 W/D) |
165/165 |
| |
Weight |
11,592 lbs |
General Specifications
- Perkins 1004-42 Series. 243 CID 4 cylinder diesel.
- Synchromesh Power Shuttle Transmission with Torque Converter. Independent
high capacity oil cooler.
- Foot operated. hydraulic actuated wet disc brake sealed in oil (246 sp.
in. total braking area). Brakes operate individually or simultaneously. The park brake is lever operated
with a disc-type caliper.
- 19.5L x 24 10PR Industrial lug drive tires (R4) and 11L x 16 8PR Laborer
tread tires for 2 W/D Machine.
- 19.5L x 24 10PR Industrial lug drive tires ($4) and 10.5/80x18
aggressive tread steer tires for 4 W/D Machine. (14x17.5 aggressive tread optional)
- Heavy duty drive axle consists of double reduction matched pinion and
bevel gear with outboard planetary gear with final reduction.
- Hydrostatic power steering with 2 double acting steer cylinders on 2
wheel drive machines. 4 wheel drive machines have 1 larger double acting cylinder.
- Mast Side Shift (shifts entire mast, carriage, forks and load 3" in
either direction).
- HYDRAULICS: 30.5 GPM Capacity @ 2200 PSI @ 2200 RPM Crankshaft driven gear type 2 stage
pump, 3 spool control valve, pre-set relief valve, two mast cylinders, two mast tilt cylinders,
and one mast side shift cylinder.
- Forklift meets or exceeds ANSI B56.6-1996 design criteria.
- Industrial type seat adjustable forward and rearward. (w/seat belt and
drain slot)
- Instruments include gauges for water temperature, oil pressure, fuel level, volt meter,
and park brake warning light. The hour meter is located in the engine compartment and
all units are equipped with a back-up alarm.
Optional warning lights include oil pressure, water temp., air filter restriction,
and hydraulic oil restriction.
NOTE: Our policy of continual engineering research and improvement
makes it necessary that we reserve the right to make changes in designs, specifications, components
without advanced notice.
NOTE 2: This engine meets all 1998 EPA Emissions Regulations.